IFM Efector PN7071 Pressure Sensor with Display PN-250-SER14-QFRKG/US/ /V New in Box

Specifications:

SKU: 11085-2
Condition: New Surplus Manufacturer Packaging
Brand: IFM Efector
Model: PN7071
Description: Pressure Sensor with Display PN-250-SER14-QFRKG/US/ /V New in Box

Origin: Germany
EAN: 4021179281201

Notes: Two switching outputs, one of them with IO-Link communication interface
Red/green display for clear identification of the acceptable range
The process connection can be rotated for optimum alignment
With long-term stability thanks to high overload protection
Robust design for use in harsh industrial environments

Number of inputs and outputs
Number of digital outputs: 2
Measuring range
0…250 bar
0…3620 psi
0…25 MPa
Process connection
threaded connection G 1/4 Internal thread
Application
System
gold-plated contacts
Measuring element
metallic thin film cell
Application
for industrial applications
Media
liquids and gases
Medium temperature [°C]
-25…80
Min. bursting pressure
1100 bar
15950 psi
110 MPa
Pressure rating
500 bar
7250 psi
50 Mpa
Vacuum resistance [mbar]
-1000
Type of pressure
relative pressure
Electrical data
Operating voltage [V]
18…30 DC; (to SELV/PELV)
Current consumption [mA]
< 35 Min. insulation resistance [MΩ] 100; (500 V DC) Protection class III Reverse polarity protection yes Power-on delay time [s] < 0.3 Integrated watchdog yes Inputs / outputs Number of inputs and outputs Number of digital outputs: 2 Outputs Total number of outputs 2 Output signal switching signal; IO-Link; (configurable) Electrical design PNP/NPN Number of digital outputs 2 Output function normally open / closed; (configurable) Max. voltage drop switching output DC [V] 2.5 Permanent current rating of switching output DC [mA] 150; (200 (...60 °C) 250 (...40 °C)) Switching frequency DC [Hz] < 170 Short-circuit protection yes Type of short-circuit protection yes (non-latching) Overload protection yes Measuring/setting range Measuring range 0...250 bar 0...3620 psi 0...25 MPa Factory setting / CMPT = 2 Set point SP 2...250 bar 40...3620 psi 0.2...25 MPa Reset point rP 1...249 bar 20...3600 psi 0.1...24.9 MPa Min. difference between SP and rP 2 bar 20 psi 0.2 MPa In steps of 1 bar 20 psi 0.1 MPa Status_B High Resolution / CMPT = 3 Set point SP 2...250 bar 30...3626 psi 0.2...25 MPa Reset point rP 1...249 bar 12...3608 psi 0.1...24.9 MPa Min. difference between SP and rP 2 bar 19 psi 0.2 MPa In steps of 0.1 bar 20 psi 0.1 MPa Accuracy / deviations Switch point accuracy [% of the span] < ± 0,5 Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K) Characteristics deviation [% of the span] < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) Hysteresis deviation [% of the span] < ± 0,25 Long-term stability [% of the span] < ± 0,05; (per 6 months) Temperature coefficient zero point [% of the span / 10 K] 0,2; (-25...80 °C) Temperature coefficient span [% of the span / 10 K] 0,2; (-25...80 °C) Reaction times Response time [ms] < 3 Delay time programmable dS, dr [s] 0...50 Software / programming Parameter setting options hysteresis / window; normally open / closed; switching logic; switch-on/switch-off delay; Damping; Display unit Interfaces Communication interface IO-Link Transmission type COM2 (38,4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 SIO mode yes Required master port class A; (when pin 2 not connected: B) Process data analog 1 Process data binary 2 Supported DeviceIDs Type of operation DeviceID Factory setting / CMPT = 2 400 Status_B High Resolution / CMPT = 3 598 PN7001 308 Note For further information please see the IODD PDF file at "Downloads" Factory setting / CMPT = 2 Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis Min. process cycle time [ms] 2.3 IO-Link resolution pressure [bar] 1 IO-Link resolution pressure [MPa] 0.1 IO-Link process data (cyclical) Function bit length pressure 14 binary switching information 2 IO-Link functions (acyclical) application specific tag Status_B High Resolution / CMPT = 3 Profiles Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) Min. process cycle time [ms] 3 IO-Link resolution pressure [bar] 0.1 IO-Link resolution pressure [MPa] 0.01 IO-Link process data (cyclical) Function bit length pressure 16 device status 4 binary switching information 2 IO-Link functions (acyclical) application specific tag Operating conditions Ambient temperature [°C] -25...80 Storage temperature [°C] -40...100 Protection IP 65; IP 67 Tests / approvals EMC DIN EN 61000-6-2 DIN EN 61000-6-3 Shock resistance DIN EN 60068-2-27 50 g (11 ms) Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz) MTTF [years] 214 UL approval UL approval number J003 Pressure equipment directive sound engineering practice; can be used for group 2 fluids; group 1 fluids on request Mechanical data Weight [g] 239.2 Material 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC Materials (wetted parts) 1.4542 (17-4 PH / 630) Min. pressure cycles 100 million Tightening torque [Nm] 25...35; (recommended tightening torque; Depends on lubrication, seal and pressure rating) Process connection threaded connection G 1/4 Internal thread Restrictor element integrated no (can be retrofitted) Displays / operating elements Display Display unit 3 x LED, green (bar, psi, MPa) Switching status 2 x LED, yellow Measured values alphanumeric display, red/green 4-digit Remarks Pack quantity 1 pcs. Electrical connection Connection Connector: 1 x M12; coding: A; Contacts: gold-plated *Actual product may vary from images.* NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with IFM Efector or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners. We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.