IFM Efector PP7552 Pressure Switch PP-100-SBG14-QFPKG/US/ /V IO-LINK with Ceramic Measuring Cell

Specifications:

SKU: 10855-2
Condition: New Surplus Manufacturer Packaging
Brand: IFM Efector
Model: PP7552
Description: Pressure Switch PP-100-SBG14-QFPKG/US/ /V IO-LINK with Ceramic Measuring Cell

Origin: Romania
EAN: 4021179189682

Notes: From MFG:
Robust design for use in harsh industrial environments
Two switching outputs, one of which can be configured as diagnostic output
High shock and vibration resistance
Lifespan of more than 100 million pressure cycles
User-friendly communication via IO-Link

Product characteristics
Number of inputs and outputs
Number of digital outputs: 2
Measuring range
0…100 bar
0…1450 psi
0…10 MPa
Process connection
threaded connection G 1/4 external thread Internal thread:M5
Application
Application
for industrial applications
Media
liquids and gases
Conditionally suitable for
use in gases at pressures > 25 bar only on request
Medium temperature [°C]
-25…90
Min. bursting pressure
650 bar
9400 psi
65 MPa
Pressure rating
300 bar
4350 psi
30 Mpa
Type of pressure
relative pressure
Electrical data
Operating voltage [V]
9.6…36 DC; (communication mode: 18…32)
Current consumption [mA]
< 45 Min. insulation resistance [MΩ] 100; (500 V DC) Protection class III Reverse polarity protection yes Power-on delay time [s] 0.3 Inputs / outputs Number of inputs and outputs Number of digital outputs: 2 Outputs Total number of outputs 2 Output signal switching signal; IO-Link; (configurable) Electrical design PNP Number of digital outputs 2 Output function normally open / closed; (configurable) Max. voltage drop switching output DC [V] 2 Permanent current rating of switching output DC [mA] 250 Switching frequency DC [Hz] 170 Short-circuit protection yes Type of short-circuit protection yes (non-latching) Overload protection yes Measuring/setting range Measuring range 0...100 bar 0...1450 psi 0...10 MPa Set point SP 1...100 bar 20...1450 psi 0.1...10 MPa Reset point rP 0.5...99.5 bar 10...1440 psi 0.05...9.95 MPa In steps of 0.5 bar 10 psi 0.05 MPa Factory setting SP1 = 25.0 bar rP1 = 23.0 bar SP2 = 75.0 bar rP2 = 73.0 bar OUT1 = Hno OUT2 = Hno Accuracy / deviations Switch point accuracy [% of the span] < ± 0,5 Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K) Characteristics deviation [% of the span] < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) Hysteresis deviation [% of the span] < ± 0,1 Long-term stability [% of the span] < ± 0,1; (per year) Temperature coefficient zero point [% of the span / 10 K] 0,2; (0...80 °C) Temperature coefficient span [% of the span / 10 K] 0,2; (0...80 °C) Reaction times Response time [ms] < 3 Damping process value dAP in steps [s] 0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500 Interfaces Communication interface IO-Link Transmission type COM2 (38,4 kBaud) IO-Link revision 1.0 Profiles no profile SIO mode yes Required master port class A Process data analog 1 Process data binary 2 Min. process cycle time [ms] 2.3 Supported DeviceIDs Type of operation DeviceID default 4 Operating conditions Ambient temperature [°C] -25...85 Storage temperature [°C] -40...100 Protection IP 68; (7 days / 1 m water depth / 0.1 bar) Tests / approvals EMC noise immunity EN 61000-6-2 EN 61000-4-2 ESD 4 kV contact discharge / 15 kV air discharge EN 61000-4-3 HF radiated 20 V/m EN 61000-4-4 Burst 4 kV coupling clamp EN 61000-4-5 Surge 0,5 kV supply / 1 kV signal for DC units EN 61000-4-6 HF conducted 10 V noise immunity according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG Absorber chamber test to ISO 11452-2: 80 V/m EN 50155 Klasse T3, C1, S1 Shock resistance DIN IEC 60068-2-27 / DIN IEC 60068-2-29 1000 g DIN EN 61373 Category 3 Vibration resistance DIN IEC 68-2-6 20 g (10...2000 Hz) DIN EN 60068-2-64 14 g DIN EN 61373 Category 2 MTTF [years] 310 UL approval UL approval number J009 Pressure equipment directive sound engineering practice; can be used for group 2 fluids; group 1 fluids on request Mechanical data Weight [g] 228 Material stainless steel (1.4301 / 304); FKM; EPDM/X; PA Materials (wetted parts) stainless steel (1.4305 / 303); ceramics; FKM Min. pressure cycles 100 million Process connection threaded connection G 1/4 external thread Internal thread:M5 Restrictor element integrated no (can be retrofitted) Displays / operating elements Display Power 2 x LED, green Switching status 2 x LED, yellow Teach function yes Remarks Pack quantity 1 pcs. Electrical connection Connection Connector: 1 x M12; coding: A NEO Surplus is not an authorized distributor, representative, reseller, or affiliated with IFM Efector or any manufacturer, brand, or product. Items being sold are not covered under any manufacturer warranty. All trademarks, brand names and brands appearing herein are the property of their respective owners. We do our best to get all the information in this listing correct. If you see an error or have any questions, please contact us.